High-tech systems for heating and drying of materials with an accurate and reliable run of individual processes, suitable for use in research, development, production, or for quality control. The sectional principle that applies to the design of pharmaceutical ovens allows a wide range of optional equipment and accessories. The basic model is available – depending on the oven type – in volume size range from 22 to 1212 liters, with either natural or forced air circulation and possibility to connect the vacuum. The instruments are manufactured in two series of basic control automatics – ECO line and EVO line.

High-tech systems for incubation – both heating and cooling, humidity and light control – intended for use in research, development, production, or quality control. The sectional principle that applies to the design of pharmaceutical incubators allows a wide range of optional equipment and accessories. The basic model is available – depending on the oven type – in volume size range from 22 to 1212 liters, with either natural or forced air circulation, natural heating and cooling, controlled humidity and controlled CO₂ atmosphere. The instruments are manufactured in two series of basic control automatics – ECO line and EVO line.

These hot air sterilizers are suitable for the pharmaceutical industry. For the side effects of forced-pricking dry, hot air. Apparatus suitable for sterilization up to 180°C or depyrogenation up to 300°C.

An integral line of large steam sterilizers for the pharmaceutical industry and science. The sterilization effect is achieved through the action of saturated water steam subject to a specified temperature, pressure and sterilization exposure time. Usually, a temperature of 121°C or 134°C is applied during the sterilization exposure time, which ranges from 4 – 60 minutes, depending on the nature of use. A module design allows variants to be put together according to customers’ individual requirements. Most units can be ordered in a single- or double-door (open-through) design.